Since the beginning of the year, I’ve been alluding to a new dry-hopping procedure I devised. I’ve probably explained it in parts here and there, but never in great detail. Since I’ve gotten a number of emails about exactly what I use and how I go about it, I figured I’d do a short editor’s note: I’ve been very, very happy with the results, and it doesn’t really require much extra effort, just a few more pieces of equipment to easily be cleaned. The only downside, potentially, is the cost, and dedicating a keg just to dry-hopping. Here’s the basic theory behind this: When I was bottling my IPAs, no matter how good the recipe or how well-managed the fermentation, they would always drop off very, very quickly. The better you can prevent O2 from infiltrating your beer, the better chance the hop character has to preserve its awesomeness. During fermentation and for maybe a week or so after, enough CO2 is generated that there’s a protective blanket over the beer. Yeast are still cleaning up and doing their thing.

Homebrew Recipe: Imperial Stout

Furthermore, beer stays very stable in a Cornie giving it a good shelf life providing you can keep your hands off of it. However, after some initial confusion and frustration things have finally clicked into place and Cornies now have a definite future for me. Hopefully this post can help you to work out what you need, so please learn from my mistakes a checklist at the end summarises the basic, essential, kit. What you need to make Cornies work for you. Cornie keg with a cheap and simple tap fitted.

Beware — this type of tap can be locked open for flushing out.

This replacement Keg Lid is suitable for Cornelius Type 19L and L Kegs. Features: High quality stainless steel – Silicon O-ring (White or Black) – Ring pull pressure relief valve – Inside hook to attach hop bombs or a hop tube.

Malt and Vine is happy to provide kegs for weddings, parties, corporate events, or kegerators! Come by and take a look at our on hand keg list! We keep over kegs on hand in various sizes, and can order from over 1, more! Just let us know what you’re looking for! Ordering We keep a selection of kegs-to-go on hand, but you can also pre-order exactly what you’re looking for!

What is a Jockey Box?

Portable Draft Beer Serving Options!

Whether you are serving your cold brew coffee from a Commercial Sanke D Style Keg, or a homebrew Corny Keg, our revolutionary Nitro Infusion modules allow you to take a flat keg of Cold Brew Coffee and instantly nitrogenate it on the fly! The Nitro Infuser uses patented technology which mixes the cold brew coffee with high pressure nitrogen in a series of chambers just before existing the faucet, giving your nitro coffee the optimal frothiness and head.

With this system you no longer need to worry about pre-charging and infusing kegs with nitrogen prior to serving a rich, frothy nitro coffees. Simply attach your flat cold brew coffee keg to the inline nitro infuser system and you are ready to turn flat cold brew coffee into nitro coffee instantly!

When setting up your system always put a check valve between the regulator and keg. This prevents beer from backing up the gas line and fouling the regulator. It’s also a good practice to never hook up a keg without first applying pressure to the gas line.

What is it about fizz that turns a drink from boring to brilliant? Having sparkling water on tap is perfect when you want something exciting and refreshing but without any calories or alcohol. Making the water costs pennies. Nowadays, they deliver a box of syrup that gets mixed in-line with carbonated water in the system. Lucky for us homebrewers, that opened a world of used kegs to us that are perfect sized for homebrew batches. Each keg holds five gallons.

First I clean them thoroughly, taking all the hardware apart and soaking in a cleaner similar to oxyclean. Then I sanitize with a homebrew sanitizer. This thoroughness is honestly probably not necessary for sparkling water, but I do it because these kegs will also be used to hold beer at some point, and contamination from unwanted microorganisms can quickly ruin a batch of beer.

I then fill it almost to the brim with ice water.

5/16″ Gas Line Assembly – Ball Lock – Draft Beer Dispensing Cornelius Corny Keg

Share Save Brewing your own beer is surprisingly easy and cheap. But, it can seem intimidating. Plus, some of the equipment takes up a lot of space if you really start to embrace the hobby. Companies like Picobrew have been trying to simplify the process to make it more appealing to newcomers and those with limited space.

4 Faucet Fridge Homebrew Kegerator Kit. $ All of the lines are fully assembled and ready to hook up to a keg. If you order this, make sure you have a batch of beer ready to keg because you’re not going to want to wait to get pouring. Converted Ball Lock Keg, Cornelius Keg, 5 Gallon w/ NEW Posts + NEW Lid for Homebrew/Soda. $

This set will allow you to switch from one style keg to another extremely quickly and easily. The set includes 3 inline quick disconnects sets, hose clamps, and extra tubing. The inline quick disconnects seal on both ends when the set is disconnected so you can disconnect them and not loose all your gas. Turn off your gas tank and disconnect the tap from the keg.

Cut the lines approximately inches away from the tap and put a set in each line. The 3rd set of quick disconnects are to be hooked up to the supplied extra tubing to go on the Cornelius style keg qd’s. Please note the orientation of the qd’s on the beer and gas line so you put the fitting on the appropriate side. The inline qd’s are opened by pushing down on the stainless lever, then pull the qd’s apart.

They do seal when separated, however some dripping may occur on the beer side. To engage, simply slide the male side into the female till you hear a click or it won’t separate when you pull them apart. You may have to push in on the stainless lever to get the male to go in.

Hot New Products

Details Our versatile Whether you ferment, beer, cider, mead or wine our Uni-Fermenter allows you to transfer your product with co2 pressure just like how a commercial brewery would transfer beer. This means no more lifting, pouring or siphoning your beer. Simply hook up your co2 tank disconnect to the Uni-Fermenter and connect a transfer tube between the liquid out fitting of the Uni-Fermenter to the liquid out fitting of your keg or other fermenter to be filled.

Then set the pressure to PSI on your co2 regulator and open up the vent or pressure relief valve on the keg, fermenter or vessel being filled and watch the beer flow! Using co2 pressure to tranfer your product is far superior to pumping or siphoning as both of these processes introduce oxygen to the product which causes oxidization, off-flavors, contamination and product instability.

Find out more about this great starter kegerator kit. If you’re looking at getting started with kegging, then the Cornelius kegerator kit is perfect for you. Find out more about this great starter kegerator kit. Once that is all done just hook your keg hoses up and turn on the gas then you’re all good to go.

I had initially included cheap components in my barebones carbonating cocktails post. Find your local gas supply store and pick up a used tank from them. I think I got a 10 lb. Usually the LHBS is buying from the gas supplier and reselling at x the cost. Google for dry ice in your area, the local dry ice seller probably does tank swaps. I hear welding shops do too but have never been to one.

For home use these last me quite awhile, however for my commercial stuff I blow through 10 lbs. Should have known from its 3. A crappy one is also going to require a wrench to adjust, whereas a good one can be adjusted by hand. I love the Micromatic , pictured here. Get a gauge cage or two if you go with the dual regulator. This will save it from busting a gauge and pay for itself quickly.

Make sure to strap the tank in place.

Fermenting in a Keg Pt. 1

Kegging your homebrew saves time and money and offers a very convenient way to serve your beer. This article walks you through the basics of purchasing a kegging system, filling your kegs and serving your kegged beer at home. A kegging system consists of a keg, a CO2 carbon dioxide gas tank, a pressure regulator and two hoses. One hose feeds CO2 gas into your keg inlet, and the other hose brings the beer from the keg to your tap.

Google right now a couple videos how corny kegs work and hook up. It’ll settle a lot of the confusion. These kegs are very popular with home brew cause they’re so easy.

Horizontal Tap Kegerators Kegerators are common pieces of beer equipment that can be used in a variety of businesses and for lots of occasions. A kegerator has an interior cavity for the keg, a latching or sealing front door, and a hole for the hoses and dispensing tower. Depending on the brand and model, there will most likely have to be room for the CO2 canister outside the unit. Once plugged in, the refrigeration system kicks on and cools the keg so that you can serve ice-cold beer. And for added versatility, there are single keg units , multiple keg units , and multi-purpose units that incorporate refrigerators for cans and bottles.

When installing a kegerator, it’s usually as easy as finding the right place and an outlet. Afterward, run the proper lines from the CO2 canister to the keg and from the keg to the tower.

Senior canoodle dating

Many home brewers use sanitized airs and gases to maintain a sterile environment during fermentation, racking, kegging and aging home brew. This is due to the great probability that there are organisms in the air that could potentially contaminate a future batch of beer. By using a purified gas to purge your kegs of the various airs that end up inside them, you remove one more factor that could cause beer spoilage.

The Cornelius or “corny” keg is widely used by homebrewers. They are relatively cheap, they were produced by the millions, and they hold five gallons of liquid which is pretty darn convenient. Go ahead and hook up your regulator and make sure that it works correctly. It’s important to check that the pressure regulating valve is.

The ideal length and type of dispense hose is an issue upon which one could easily write a full-length dissertation. Factors like restriction, viscosity, temperature, line material, tap type and volume of dissolved CO2 all play important roles in the condition of your beer as it travels from keg to glass. Here are a few general comments and suggestions on the subject while leaving the technical reasons and specifics to the experts.

At least six feet of it is recommended for your tap assembly. The length really depends on the amount of carbonation you want to remain in your beer as you dispense which, in turn, depends on the style. Heat the hose, not the barb! Luckily, the assembly is fairly permanent and can be cleaned as one unit. At the other end of the line is the metal hose barb and nut assembly, which allows you to screw on a pin- or ball-valve connector, sold as a unit.

Use the same heating trick to get the metal barb in. Again, make sure you also invest in a few little nylon washers.

5 Gallon Ball Lock Keg – Rubber Handle – Made in Italy – Set of 2

Small Draft Systems Small kegging setups that lend themselves to easy transport. You can either fill from your kegerator or bottle condition directly in these. The BeerBox uses 2. These are sized to easily fit in a refrigerator or cooler.

Up to 3 Cornelius Homebrew Kegs (1) Slim Quarter & (1) Sixth Barrel Keg (1) Slim Quarter & (1) Cornelius Keg. Easy 30 Minute Assembly. Use our easy to follow instruction guide or assembly video to build your kegerator. The average assembly time is .

Single Gauge The single gauge on these regulators is known as the output pressure gauge because it clearly shows how much pressure is being dispensed. This is critical because having too much or too little pressure could cause excessively foamy beer, flat beer, and a variety of other problems. Double Gauge Dual gauge regulators feature the same output pressure gauge from the single gauge models so you can see how much pressure is being dispensed.

However, they also come with a tank pressure gauge that shows how much CO2 is left in your tank so you can be confident that you’ll never run out. Distributors Distributors are similar to secondary regulators in that they connect to the primary regulator to supply pressure to various kegs and, because they’re not bound to a gas tank, can be mounted in a more convenient location.

The key difference between them is that distributors provide no way of regulating pressure, so while they do have individual shut off valves for each keg, they don’t have a gauge and must be used on kegs requiring the same pressure. Using a distributor on kegs requiring different pressure would mean one or more of the kegs isn’t getting the ideal amount of CO2, which can lead to a bunch of other problems as highlighted in our article on Maintaining Your Beer Tap System.

Tap Towers Also known as draft beer towers or draft arms, beer tap towers are mounted on top of a counter or kegerator and are responsible for not only containing the beer lines, but also holding the beer faucets in place. There are two primary questions you need to ask yourself when choosing a beer tap tower. How many kegs will I be dispensing out of it? This will determine how many faucets the draft tower will need to accommodate. What size column do I need?

Announcement

During my first few years of homebrewing I always seemed to struggle with getting great hop flavor and aroma into my IPAs. Over the past two years, I have experimented with various techniques for brewing IPAs. It took several iterations of brewing the same beer before I reached a point that I was satisfied with when it comes to hop flavor and aroma.

The next step is creating the collar. I bought a big-ass piece of wood from Home Depot. Luckily my future father-in-law is a general contractor and so he helped me cut the wood at 45 degree angles since I wanted a “cleaner” cut as opposed to simply cutting the ends at 90 degree angles.

But what a deal it was, I have been using the setup since Nov. Two reconditioned 5 gallon SS Cornelius kegs 2. Double dual gauge CO2 regulator 4. Two hand held taps the keg party kind 5. After cleaning is complete, fill the keg with about gallons of water and a cap full of the star san food grade sanitizer. The gas IN post should have a line indention around the post. This will allow all the sanitizing solution to pass through the keg.

The keg is now ready for beer. Just make sure all of the equipment used to transfer the beer is sanitized. If using a carboy or bucket I prefer to put it on a kitchen counter and siphon it with a little help from gravity. After applying the keg lube, close the lid and get ready to carbonate.

How to set up home brew kegging system